秦庆华教授(前沿交叉院)

     秦庆华博士目前是深圳北理莫斯科大学教授，前沿交叉技术研究院院长。在华中科技大学获得力学专业硕士和博士学位。博士毕业后留在华中科技大学从事教学和科研工作。1994年获得DAAD/K.C.Wong研究基金，在德国斯图加特大学（University  of  Stuttgart）开展9个月的科研工作。1995-1997年在清华大学开展博士后研究工作。1997年获得伊丽莎白女王二世基金（Queen  Elizabeth II  fellowship）在悉尼大学开展研究，1998年获得澳大利亚科学院J.G.  Russell奖。2001-2006年以天津大学为依托单位获得中国教育部长江学者讲座教授。2002年获得澳大利亚研究委员会教授基金及主持过多项澳大利亚国家面上基金，2006年至2021为澳大利亚国立大学教授。秦教授目前主要从事结构材料和功能材料的设计及性能研究。2009-2021担任澳大利亚国立大学工程研究中心材料加工制造组组长及学科带头人，2011-2013担任澳大利亚国立大学工学院副院长。2007  获选澳大利亚工程师学会高级会员。从2016年起连续列为爱思维尔中国高被引学者。2020年入选斯坦福大学发布的世界800  万学者之中前2%的顶尖科学家排行榜名单。此外，发表SCI  收录期刊论文400多篇出版英文专著9部。

■ Biography-Short  Description

Dr. Qin  Qinghua is currently a professor  at Shenzhen MSU-BIT University.  He obtained a master's degree  and a doctorate degree in  applied mechanics from Huazhong  University of Science and  Technology. After graduation, he  stayed in Huazhong University of  Science and Technology to engage  in teaching and scientific  research. In 1994, he received  the DAAD/K.C. Wong Research Fund  and carried out 9-month  scientific research work at the  University of Stuttgart,  Germany. From 1995 to 1997, he  carried out postdoctoral  research at Tsinghua University.  He was awarded the Queen  Elizabeth II fellowship to  conduct research at the  University of Sydney in 1997,  and was awarded the J.G. Russell  Prize from the Australian  Academy of Sciences in 1998.  From 2001 to 2006, he was  awarded the Changjiang Scholars  Chair Professor of the Ministry  of Education of China with  Tianjin University as the  support unit. In 2002, he was  awarded the Australian Research  Council Professor Fund and  chaired a number of Australian  national general funds. From  2006 to 2021, he was a professor  at the Australian National  University. Professor Qin is  currently mainly engaged in the  design and performance research  of structural materials and  functional materials. From 2009  to 2021, he served as the leader  and subject leader of the  Materials Processing and  Manufacturing Group of the  Engineering Research Center of  the Australian National  University, and from 2011 to  2013, he served as the Deputy  Dean of the School of  Engineering of the Australian  National University.

       He was elected a Senior Member  of the Institution of Engineers  Australia in 2007. He has been  continuously listed as Elsevier  China Highly Cited Scholar  since2016. In 2020, he was  selected into the list of the  top 2% of the top scientists  among the world's 8 million  scholars released by Stanford  University. In addition, he  published more than 400 papers  in SCI journals and 9 monographs  in English.

■ 教育经历

□ 1978.02-1982.02西安公路学院筑路机械系工程机械专业，大学本科;
□ 1982.02-1984.07  华中理工大学力学系计算力学专业，硕士研究生;
□ 1987.05-1990.12  华中理工大学力学系固体力学专业，博士研究生.

■ 工作经历

□ 1982.02-1995.04 华中理工大学 讲师

□ 1995.05-1997.05清华大学工程力学系 博士后

□ 1997.05-2001.09澳大利亚悉尼大学 ARC  QEII研究员

□ 2001.09-2006.09天津大学力学系  长江学者特聘教授

□ 2006.09-2021.03澳大利亚国立大学工学院 教授

□ 2011.07-2013.07澳大利亚国立大学工学院 副院长

□ 2021.03-当前     深圳北理莫斯科大学材料科学系 教授

■ 研究领域

□计算力学；

□有限元和边界元法；

□复合材料；

□纳米材料和力学材料；

□增材制造

■ Research  Interest

Computational Mechanics；Finite  and Boundary Element  Method；Composite Materials；  Nanomaterials and  Nanomechanics；Additive  Manufacturing.

■ 主讲课程

1．材料力学；

2．计算力学；

3．复合材料；

4．结构优化

■ 社会兼职

□Editor-in-Chief, International  Journal on Engineering  Applications (2013-）

□Editor-in-Chief, AIMS Materials  Science (2019-)

□Editor-in-Chief, Current  Mechanics and Advanced Materials  (2019-2023)

■ 荣誉奖励

□1994 DAAD/K.C. Wong fellowship  awarded by DAAD, Germany；

□1997 Queen Elizabeth II  Fellowship, awarded by the  Australia Research Council (ARC)  (as one of 15 awardees  worldwide)；

□1998 J.G. Russell Award,  awarded by the Australian  Academy of Science, Australia；

□2001   Cheung Kong  Professorship, awarded by the  Ministry of Education of China；

□2002    ARC Professorial  Fellowship, awarded by the  Australia Research Council (as  one of 15 awardees worldwide)；

□2007    Endeavour Executive  Award, awarded by Department of  Education, Science, and  Training, Australian Government；

■ 科研工作 （项目负责人）

□ARC Queen Elizabeth II  Fellowship project on  “Theoretical and experimental  studies on the  micro-defect-weakened- piezo-  thermoelastic materials”,  (1997-2001, AU$388608, Grant No.  F89700665)；

□ 1999 ARC Institutional small  grant, on “Dynamic fracture and  damage analysis of piezoelectric  and functionally gradient  materials” (AU$17,000)；

□ARC large grant, on  “Thermo-electro-mechanical  analysis of advanced  microelectronic packages”  (2000-2002, AU$192,836, Grant  No. A10009133)；

□Sesqui R&D Scheme of the  University of Sydney, on  “Thermoelectroelastic analysis  of bone   remodelling process”  (AU$26,000)；

□ARC Discovery-Project  (Professorial Fellowship), on  “Thermo-electro-chemo-mechanical  properties of biological  systems” (2002-2006, approved  funding: AU$686,825; Actually  received $741657, Grant No.  DP0209487)；

□ARC Discovery-Project, on  “Rheological and electrical  properties of biological soft  tissues” (2004-2006, AU$249,000,  with Z Liu and Y Yu, DP0451097)；

□National Natural Science  Foundation of China, Equivalent  multi-field theory and  mechanical behaviour of  piezoelectric biomaterials  (Grant No. 10472082; 2005-2007:  RMB$290,000)；

□ARC Discovery-Project, on  “Theoretical and experimental  studies on magnetoelectroelastic  bone remodelling process”  (2006-2008, AU$260,000, with S  Kalyanasundaram, DP0665941)；

□ARC Linkage Project, Rapid  process development for the  assembly of lightweight metal  components, (Grant No.  LP130101001, 2013-2016,  AUD$310,000, with Matthew C  Doolan, Paul Compston, Michael J  Cardew-Hall, Richard A Taube)；

□ARC Discovery-Project, Finite  element and optimization methods  for creating complex structure  in additive manufacturing (Grant  No. DP140103137; 2014-2016;  AUD$380,000; with Prof Roderick  Boswell);

□ARC Discovery-Project, Topology  optimisation of mechanical  metamaterials with additive  manufacture (Grant No.  DP160102491; 2016-2018;  AUD$340,000; with Dr Zhen Luo;  total ARC funding received:  $357,122.92)；

□National Natural Science  Foundation of China, Interfacial  mechanics and optimization  approach for biological coating  materials in additive  manufacturing (Grant No.  11372100, 2014-2017,  RMB$900,000)；

□National Natural Science  Foundation of China, Mechanical  analysis and optimization of  elastic metamaterials for  vibration and seismic wave  attenuation (Grant No. 11772204,  2018-2021, RMB$680,000)；

□National Natural Science  Foundation of China, Mechanical  design of ultra-low frequency  tunable acoustic metamaterials  based on multi-level structural  buckling (Grant No. 12272239,  2023-2026, RMB$550,000)

■代表性成果（ 著作 、论文和专利）

著作：

a)  Authored books

1. Qing-Hua Qin, The Trefftz  Finite and Boundary Element  Method, Southampton, WIT Press,  2000, 282pp (ISBN:  9781853128554, http://www.witpress.com/books/978-1-85312-855-4)

2. Qing-Hua Qin, Fracture  Mechanics of Piezoelectric  Materials, Southampton, WIT  Press, 2001, 290pp (ISBN:  9781853128561, http://www.witpress.com/books/978-1-85312-856-1)

3. Qing-Hua Qin, Green’s  function and boundary elements  in multifield materials, Oxford,  Elsevier, 2007, 266pp  (ISBN: 9780080451349, Published  on 7 June 2007)

4. Qing-Hua Qin and Q.S. Yang,  Macro-micro theory on multifield  behaviour of heterogeneous  materials (Chinese version:  Beijing, Higher Education Press,  2006, ISBN: 7040192535; English  version: Beijing, Higher  Education Press & Springer,  2008, ISBN: 9783540782582)

5. Qing-Hua Qin and H. Wang,  Matlab and C Programming for  Trefftz Finite Element Methods,  Boca Raton, Taylor & Francis,  CRC press, 2009 (ISBN:  9781420072754)

6. Qing-Hua Qin, Advanced  Mechanics of Piezoelectricity.  Higher Education Press and  Springer, Beijing, 2013 (ISBN:  9783642297663)

7. Qing-Hua Qin, Mechanics of  cellular bone  remodelling-coupled thermal,  electrical, and mechanical field  effects, Boca Raton, Taylor &  Francis, CRC press, 2013 (ISBN:  9781466564169)

8. H. Wang and Qing-Hua Qin,  Methods of Fundamental Solutions  in Solid Mechanics, Elsevier,  Oxford, published 07/06/2019;  312p. (ISBN: 9780128182833)

9. Jun-Pu Li and Qing-Hua Qin,  Radial Basis Function Methods  for Large-Scale Wave  Propagation, Bentham Science  Publishers, 2021, (ISBN:  978-1-68108-899-0 (Print), ISBN:  978-1-68108-898-3 (Online))

b)  Edited books

10. W. Yang, X.Q. Feng  and Qing-Hua Qin (eds.),  Advances in damage, fracture,  micro- and nano- meachanics (A  Volume to honor Professor  Shouwen Yu), Beijing, Tsinghua  University Press, 2009 (ISBN:  9787302208358)

11. Qing-Hua Qin and B. Sun  (eds.), Advances in Engineering  Mechanics (series), Volume 1:  Advances in Computational  Mechanics, New York, Nova  Science Publishers, 2011 (ISBN:  9781608769018)

12. Qing-Hua Qin, JQ Ye (eds.),  Toughening Mechanisms in  Composite Materials, Elsevier,  UK, 2015, 416 p.  ISBN:  9781782422792

13. Qing-Hua Qin (ed.), Trefftz and Fundamental  Solution-Based Finite Element  Methods, Bentham Science  Publishers, 355 pages, Sep 7,  2021 (ISBN: 978-981-4998-55-0  (Print); ISBN: 978-981-4998-54-3  (Online);  DOI:10.2174/97898149985431210101)

学术论文（2019-）：

2019

1. Hui Wang, Qing-Hua Qin,  Cheuk-Yu Lee, n-sided polygonal  hybrid finite elements with  fundamental solution kernels for  topology optimization, Applied  Mathematical Modelling 66,  97-117, 2019

2. Yu Zhou, Wu-Gui Jiang,  Xi-Qiao Feng, Duo-Sheng Li,  Qing-Hua Qin, Xiao-Bo Liu,  In-plane compressive behavior of  graphene-coated aluminum  nanohoneycombs, Computational  Materials Science, 156, 396-403,  2019

3. Shaohua Yan, Haiyang Zhou,  Qing-Hua Qin, Microstructure  versus size: nano/microscale  deformation of  solute-strengthening Al alloys  via pillar compression tests,  Materials Research Letters 7(2),  53-59, 2019

4. Junpu Li, Wen Chen, Zhuojia  Fu, Qing-Hua Qin, A regularized  approach evaluating the  near-boundary and boundary  solutions for three-dimensional  Helmholtz equation with wideband  wavenumbers, Applied Mathematics  Letters 91, 55-60, 2019

5. Lei Wang, Kun Cai, Yi Min  Xie, Qing-Hua Qin, Thermal  shrinkage and stability of  diamondene nanotubes,  Nanotechnology, 30, 075702  (11pp), 2019

6. B Song, K Cai, J Shi, YM Xie,  Qing-Hua Qin, Coupling effect of  van der Waals, centrifugal, and  frictional forces on a GHz  rotation–translation  nano-convertor, Physical  Chemistry Chemical Physics, 21  (1), 359-368, 2019

7. Hui Wang, Qing-Hua Qin,  Thermal analysis of functionally  graded coating/substrate system  using the approximated transfer  approach, Coatings, 9, 51  (17pp), 2019

8. Junpu Li, Wen Chen, Zhuojia  Fu, Qing-Hua Qin, A regularized  approach evaluating origin  intensity factor of singular  boundary method for Helmholtz  equation with high wavenumbers,  Engineering Analysis with  Boundary Elements, 101, 165-172,  2019

9. Yuan Li, MingHao Zhao,  Qing-Hua Qin, CuiYing Fan,  Analysis Solution Method for 3D  Planar Crack Problems of  Two-Dimensional Hexagonal  Quasicrystals with Thermal  Effects, Applied Mathematical  Modeling, 69, 648-664, 2019

10. Peng Wu, Jiaqi Dong,  Linglong Zhang, Qing-Hua Qin,  Benchmark solution for  multilayer  magneto-electro-elastic plates  adhesively bonded by  viscoelastic interlayer, Journal  of Intelligent Material Systems  and Structures 30(3), 445-462,  2019

11. Yu Zhou, Wu-Gui Jiang,  Duo-Sheng Li, Qing-Hua Qin,  Study on Lightweight and  Strengthening Effect of Carbon  Nanotube in Highly Ordered  Nanoporous Nickel: A Molecular  Dynamics Study, Applied  Sciences, 9(2),  352, 2019

12. Junjie He, Duosheng Li,  Wugui Jiang, Liming Ke, Guohua  Qin, Yin Ye, Qing-Hua Qin,  Dachuang Qiu, The martensitic  transformation and mechanical  properties of Ti6Al4V prepared  via selective laser melting,  Materials 12(2),  321, 2019

13. Junpu Li, Wen Chen, Qing-Hua  Qin, Zhuojia Fu, A modified  multilevel algorithm for  large-scale scientific and  engineering computing, Computers  and Mathematics with  Applications, 77, 2061-2076,  2019

14. Jiaqi Dong, Weiqi Chen, Zhe  Zeng, Qing-Hua Qin, Yi Xiao,  Analysis of wave band gaps in  mechanical metamaterial based on  Nelder-Mead method, Engineering  Analysis with Boundary Elements,  103, 109-115, 2019

15. Chao Hu, Xinwen Liao,  Qing-Hua Qin, Gang Wang, The  fabrication and characterization  of high density polyethylene  composites reinforced by carbon  nanotube coated carbon fibers,  Composites Part A, 121, 149-156,  2019

16. Likui Yang, Kun Cai, Jiao  Shi, Yi Min Xie, Qing-Hua Qin,  Nonlinear dynamic behavior of a  clamped-clamped beam from BNC  nanotube impacted by fullerene,  Nonlinear Dynamics, 96 (2),  1133-1145, 2019

17. X Wang, T Yildirim, KJ Si, A  Sharma, Y Xue, Qing-Hua Qin, Q  Bao, W Cheng, Y Lu, An Adaptive  Soft Plasmonic Nanosheet  Resonator, Laser & Photonics  Reviews, 13, 1800302, 2019

18. Y. Li, C. Fan, Qing-Hua Qin,  M. Zhao, Closed-form solutions  of an elliptical crack subjected  to coupled phonon–phason  loadings in two-dimensional  hexagonal quasicrystal media,  Mathematics and Mechanics of  Solids, 24(6), 1821-1848, 2019

19. Liang Chen, Wu-Gui Jiang,  Hang Zou, Xi-Qiao Feng, Qing-Hua  Qin, Xin Li, Coupling analysis  of screwing motion of  double-walled carbon nanotubes,  Physics Letters A, 383,  2309-2313, 2019

20. H. Zou, W.G. Jiang, L. Chen,  Qing-Hua Qin, Y.W. Lin, The  Origin of Self-excited  Oscillation of Double-Walled  Carbon Nanotubes, Materials  Research Express, 6 (7), 075033  2019

21. Yan-Wen Lin, Wu-Gui Jiang,  Qing-Hua Qin, Yu-Jiang Chen, A  novel dual-signal output  screwing oscillator based on  carbon@MoS2 nanotubes, Applied  Physics Express 12 (6), 065001,  2019

22. Q. Guo, J.J. Dong, Y. Liu,  X.H. Xu, Qing-Hua Qin, J.S.  Wang, Macroscopic and  microscopic mechanical behaviors  of climbing tendrils, Acta  Mechanica Sinica, 35(3),  702-710, 2019

23. Jinzhao Liu, Zhende Hou,  Qing-Hua Qin, Donghui Fu,  Shaozhe Pan, Variation of  streaming potentials with time  under steady fluid pressure in  bone, Applied Sciences, 9, 3726,  2019

24. H. Wang, W.Q. Lin, ,  Qing-Hua Qin,  Fundamental-solution-based  hybrid finite element with  singularity control for  two-dimensional mixed-mode crack  problems, Engineering Analysis  with Boundary Elements, 108,  267-278, 2019

25. Z.H. Wang, C. Liu, Y. Xiao,  X. Gu, Y. Xu, N.G. Dong, S.M.  Zhang, Qing-Hua Qin; J.L. Wang,  Remodeling of a cell-free  vascular graft with nanolamellar  intima into a neovessel, ACS  Nano, 13(9), 10576-10586, 2019

26. S.H. Yan, Z.Y. Zhu, C. P.  Ma, Qing-Hua Qin, H. Chen, and  Y.N. Fu, Porosity formation and  its effect on the properties of  hybrid laser welded Al alloy  joints, International Journal of  Advanced Manufacturing  Technology, 104(5-8), 2645-2656,  2019

27. Xiaoya Li, Qing-Hua Qin and  Xiaogeng Tian, Thermomechanical  response of porous biological  tissue based on local thermal  non-equilibrium, Journal of  Thermal Stresses, 42(12),  1481-1498, 2019

2020

28. Hui Wang, Yuxuan Zhang,  Wanqing Lin, Qing-Hua Qin, A  novel two-dimensional mechanical  metamaterial with negative  Poisson’s ratio, Computational  Materials Science, 171, 109232,  2020

29. Yan Yang, Kun Cai, Jiao Shi,  Qing-Hua Qin,  Shrinkage-expansion of a  tri-isometric knitting from  graphene ribbons at finite  temperature, Materials & Design,  185, 108269, 2020 (Q1)

30. Zihao Wang, Chungeng Liu, Di  Zhu, Xiang Gu, Yin Xu, Qinghua  Qin, Nianguo Dong, Shengmin  Zhang, Jianglin Wang, Untangling  the co-effects of oriented  nanotopography and  sustained anticoagulation in a  biomimetic intima on neovessel  remodelling, Biomaterials, 231,  119654, 2020

31. Xiaoya Li, Qing-Hua Qin and  Xiaogeng Tian,  Thermo-viscoelastic analysis of  biological tissue during  hyperthermia treatment, Applied  Mathematical Modelling , 79,  881-895, 2020

32. Yan-Wen Lin, Wugui Jiang,  Qing-Hua Qin, Shu-Mei Liao, A  map between excitation magnitude  and critical stable temperature  for screwing oscillators built  on double-walled nanotubes,  Physica E: Low-dimensional  Systems and Nanostructures, 118,  113943, 2020

33. Duosheng Li, Wei Zou,  Shengli Song, Yin Ye, Wugui  Jiang, Qing-Hua Qin, Yi Xiao,  Zhiguo Ye, Liang Chen, Dunwen  Zuo, Selective coupling reaction  inhibits graphene defects:  regulating the orderly  precipitation of carbon atoms,  Applied Nanoscience 10, 587–595,  2020

34. Yuan Li, Qing-Hua Qin,  Minghao Zhao, Analysis of 3D  planar crack problems in  one-dimensional hexagonal  piezoelectric quasicrystals with  thermal effect. part I:  Theoretical formulations,  International Journal of Solids  and Structures, vol. 188-189,  269-281, 2020

35. Yuan Li, Qing-Hua Qin,  Minghao Zhao, Analysis of 3D  planar crack problems in  one-dimensional hexagonal  piezoelectric quasicrystals with  thermal effect. part II:  Numerical approach,  International Journal of Solids  and Structures, vol. 188-189,  223-232, 2020

36. Kuixin Lin, Duosheng Li,  Shengli Song, Zhiguo Ye, Wugui  Jiang, Qing-Hua Qin, Enhanced  mechanical properties of 4H-SiC  by epitaxial carbon films  obtained from bilayer graphene,  Nanotechnology, 31, 195702  (13pp), 2020

37. Hui Wang, Wan-Qing Lin,  Qing-Hua Qin, Special polygonal  elements for thermal analysis of  cellular material containing  elliptical holes, International  Journal of Heat and Mass  Transfer, 154, 119703, 2020

38. J.Q. Dong, Qing-Hua Qin, Y.  Xiao, Nelder-Mead Optimization  of Elastic Metamaterials via  Machine-Learning-Aided Surrogate  Modelling, International Journal  of Applied Mechanics, 12 (1),  2050011, 2020

39. Duosheng Li, Wei Zou, Wugui  Jiang, Xinyuan Peng, Shengli  Song, Qing-Hua Qin, Jun Min Xue,  Quasi homoepitaxial growth of  modified diamond:  nickel-substrate catalytic  multilayer graphene transforming  to diamond, Ceramics  International, 46,10885–10892, 2020

40. T. Wang, Qing-Hua Qin, X.  Zhu, Reaction force and power  flow analysis of an acoustic  metamaterial beam with  multi-band gaps, Acoustics  Australia, 48, 59–67, 2020,

41. S.H. Yan, Qing-Hua Qin, H.  Chen, Z. Zhong, Hybrid laser  welding of dissimilar aluminum  alloys: welding processing,  microstructure, properties and  modelling, Journal of  Manufacturing Processes, 56,  295-305, 2020

42. Xiaoya Li, Pengfei Luo,  Qing-Hua Qin, Xiaogeng Tian, The  phase change thermoelastic  analysis of biological tissue  with variable thermal properties  during cryosurgery, Journal of  thermal stresses 43(8),  998-1016, 2020

43. Lin Qiu, Chao Hu, Qing-Hua  Qin, A novel homogenization  function method for inverse  source problem of nonlinear  time-fractional wave equation,  Applied Mathematics Letters,  109, 106554, 2020

44. Lei Wang, Kun Cai, Jiao Shi,  Qing-Hua Qin, Self-assembly of  Nano-scroll/Nano-helix from a  Diamondene Nanoribbon with One  Passivated Surface, Applied  Surface Science, 527, 146848,  2020

45. Shaohua Yan, Qing-Hua Qin*,  Zheng, Zhong, On the real-time  atomistic deformation of nano  twinned CrCoFeNi high entropy  alloy, Nanotechnology, 31 (38),  385705, 2020

46. Chao Hu, Jiaqi Dong, Junjie  Luo, Qing-Hua Qin, Guangyong  Sun, 3D printing of chiral  carbon fiber reinforced  polylactic acid composites with  negative Poisson’s ratios,  Composites Part B, 201, Article  No. 108400, 2020

47. Chao Hu and Qing-Hua Qin,  Advances in fused deposition  modeling of discontinuous  fiber/polymer composites,  Current Opinion in Solid State &  Materials Science, 24 (5),  100867, 2020

48. Yang Li, Yuan Li, Qing-Hua  Qin, Lianzhi Yang, Liangliang  Zhang, Yang Gao, Axisymmetric  bending analysis of functionally  graded one-dimensional hexagonal  piezoelectric quasicrystal  circular plate, Proceedings of  the Royal Society A:  Mathematical, Physical and  engineering sciences 476 (2241),  20200301, 2020

49. Qiu, L., Lin, J., Qing-Hua  Qin, Chen, W., Localized  space-time method of fundamental  solutions for three-dimensional  transient diffusion problem.  Acta Mechanica Sinica, 36 (5),  1051–1057, 2020

2021

50. J. Li, L. Zhang, Qing-Hua  Qin, A regularized method of  moments for three-dimensional  time-harmonic electromagnetic  scattering, Applied Mathematics  Letters, 112, 106746, 2021

51. Lin Qiu, Ji Lin, Fajie Wang,  Qing-Hua Qin, Chein-Shan Liu, A  homogenization function method  for inverse heat source problems  in 3D functionally graded  materials, Applied Mathematical  Modelling, 91, 923-933, 2021

52. Kun Cai, Xin Li, Jiao Shi,  Qing-Hua Qin, Nanospring from  partly hydrogenated 1 graphene  ribbon: A molecular dynamics  study, Applied Surface Science,  541, 148507, 2021

53. L.L. Cao, Y. Gu, C.Z. Zhang,  Qing-Hua Qin, A meshless  Chebyshev collocation method for  eigenvalue problems of the  Helmholtz equation, Engineering  Analysis with Boundary Elements,  125, 80-109, 2021

54. Lin Qiu, Fajie Wang, Ji Lin,  Qing-Hua Qin, Qinghai Zhao, A  novel combined space-time  algorithm for transient heat  conduction problems with heat  sources in complex geometry,  Computers & Structures 247,  106495, 2021

55. J Li, Y Gu, Qing-Hua Qin, L  Zhang, The rapid assessment for  three-dimensional potential  model of large-scale particle  system by a modified multilevel  fast multipole algorithm,  Computers & Mathematics with  Applications 89, 127-138, 2021

56. Bo Song, Kun Cai, Jiao Shi,  Qing-Hua Qin, Rotation-induced  axial oscillation of a composite  nanoconvertor at low  temperature, Journal of  Vibration and Control, 27(9-10),  1113-1122, 2021

57. Chao Hu, Winson NG Joon Hau,  Weiqi Chen, Qing-Hua Qin, The  fabrication of long carbon fiber  reinforced polylactic acid  composites via fused deposition  modeling: experimental analysis  and machine learning, Journal of  Composite Materials, 55(11),  1459-1472, 2021

58. Duosheng Li, Wei Zou,  Shengli Song, Yin Ye, ZhiguoYe,  Qing-Hua Qin, Dunwen Zuo,  Wenzhuang Lu, Graphene with  reciprocating carbon chains for  long-term corrosion protection,  Ceramics International, 47,  12205-12210, 2021

59. Shi, Jiao, Hu, Chunwei, Sun,  Sreykeo, Song, Bo, Qing-Hua  Qin, Bonding few-layered  graphene via collision with  high-speed fullerenes,  Nanotechnology, 32, 285704, 2021

60. Pan Zheng, Wu-Gui Jiang,  Yan-Wen Lin, Yu-Jiang Chen,  Qing-Hua Qin, Duo-Sheng Li, A  novel rotation transmission  nano-system based on  Carbon@Boron-Nitride@Carbon  heterogeneous nanotubes: A  molecular dynamics study,  Computational Materials Science,  196, 110517, 2021

61. C. Zhang, S.H. Xiao,  Qing-Hua Qin, Hui Wang, Tunable  compressive properties of a  novel auxetic tubular material  with low stress level,  Thin-Walled Structures, 164,  107882, 2021

62. K. Cai, Yan Yang, Jiao Shi,  Zheng Zhong, Qing-Hua Qin,  Thermal stability of a  nanoporous graphene membrane  candidate from an  orthogonal-diagonal nanotexture:  A molecular dynamics test,  Applied Surface Science 558,  149955, 2021

63. Kun Cai, Sreykeo Sun, Jiao  Shi, Qing-Hua Qin, Carbon  nanotube nanomotor driven by  graphene origami, Physical  Review Applied 15(5), 054017,  2021

64. Minghui Zhang, Chao Hu,  Chengzhen Yin, Qing-Hua Qin,  Jianshan Wang, Design of elastic  metamaterials with ultra-wide  low-frequency stopbands via  quantitative local resonance  analysis, Thin-Walled  Structures, 165, 107969, 2021

65. Shaohua Yan, Ahmad Nawaz,  Bilal Islam, Qing-Hua Qin,  Weiguo Mao, Yaogen Shen, Ishaq  Ahmad, Iftikhar Hussain,  Elastic-plastic deformation  behavior of sapphire M-plane  under static loading using  nano-indentation, Ceramics  International, 47, 23528-23538,  2021

66. Lin Qiu, Minghui Zhang,  Qing-Hua Qin, Homogenization  function method for  time-fractional inverse heat  conduction problem in 3D  functionally graded materials,  Applied Mathematics Letters,  122, 107478, 2021

67. Xianjia Meng, Qing-Hua Qin,  Chuanyong Qu, Tensile and  compressive strain evolutions of  bovine compact bone under  four-point bending fatigue  loading, Journal of the  Mechanical Behavior of  Biomedical Materials, 123,  104774, 2021

68. Pan Zheng, Wugui Jiang,  Qing-Hua Qin, and Duosheng Li,  Dynamic Behavior of Rotation  Transmission Nano-system in  Helium Environment: A Molecular  Dynamics Study, Molecules, 26,  5199, 2021.

69. Hui-Chuan Zhao, Xiong-fei  Gao, Qing-Hua Qin, Jian-Shan  Wang, Formation of chiral  morphologies of biological  materials induced by chirality,  Bioinspiration & Biomimetics,  16, 066005, 2021.

70. Xianjia Meng, Qing-Hua  Qin and Chuanyong Qu, Changes in  bone’s micromechanical  properties caused by fatigue  fracture. International Journal  of Fracture, 231 (2), 243-255,  2021

71. Kun Cai, Xin Li, Zheng  Zhong, Jiao Shi, Qing-Hua Qin, A  method for designing tunable  chiral mechanical carbon  networks for energy storage,  Physical Chemistry Chemical  Physics, 23, 26209-26218, 2021

2022

72. G.G. Xu, W.G. Jiang, Y.Y.  Sun, Qing-Hua Qin, Q. Li,  Particle-scale computational  fluid dynamics simulation on  selective parallel dual-laser  melting of nickel-based  superalloy, Journal of  Manufacturing Processes, 73,  197-206, 2022

73. Jiaqi Dong, Chao Hu, John  Holmes, Qing-Hua Qin, Yi Xiao.  Structural Optimisation of  Cross-Chiral Metamaterial  Structures via Genetic  Algorithm, Composite Structures,  282, 115035, 2022,  https://doi.org/10.1016/j.compstruct.2021.115035

74. J. Li, Z. Fu, Y. Gu,  Qing-Hua Qin, Recent advances  and emerging applications of the  singular boundary method for  large-scale and high-frequency  computational acoustics,  Advances in Applied Mathematics  and Mechanics 14(2), 315-343,  2022

75. Junpu Li, Lan Zhang,  Qing-Hua Qin, Fei Wang, A  localized spatiotemporal  particle collocation method for  long-time transient homogeneous  diffusion analysis,  International Journal of Heat  and Mass Transfer, 192, 122893,  2022

76. H. Wang, C. Zhang, Qing-Hua  Qin, Y. Bai, Tunable  compression-torsion coupling  effect in novel cylindrical  tubular metamaterial architected  with boomerang-shaped  tetrachiral elements, Materials  Today Communications, 31,  103483, 2022

77. Junpu Li, Lan Zhang,  Qing-Hua Qin, A regularized fast  multipole method of moments for  rapid calculation  of three-dimensional  time-harmonic electromagnetic  scattering from complex targets,  Engineering Analysis with  Boundary Elements, 142, 28-38,  2022

78. C.Z. Yin, Xi Xiao, Di Zhu,  Jianshan Wang, Qing-Hua Qin,  Design of low-frequency 1D  phononic crystals harnessing  compression-twist coupling  effect with large deflection  angle, Thin-Walled Structures,  179, 109600, 2022

79. Kuixing Lin, Duosheng Li,  Yin Ye a, Zhiguo Ye, Wugui  Jiang, Qing-Hua Qin,

Dunwen Zuo, Friction behavior of  2D hydrogenated diamond-like  films and bilayer graphene,  Diamond & Related Materials,  127, 109179, 2022

80. J.J. Dong, L. Xu, H. J. Yu,  J.S. Wang, and Qing-Hua  Qin, Fracture analysis of chiral  fiber-reinforced biocomposites,  Engineering Fracture Mechanics,  271, 108625, 2022

81. Yingbin Zhang, Huichuan  Zhao, Hongjun Yu, Qing-Hua Qin,  and Jianshan Wang, Tensile  behaviors of filaments with  misfit of chirality, Acta  Mechanica Sinica, 38, 621604,  2022

82. Miao Zou, Wu-Gui Jiang,  Qing-Hua Qin, Yu-Cheng Liu, and  Mao-Lin Li, Optimized XGBoost  Model with Small Dataset for  Predicting Relative Density  of Ti-6Al-4V Parts Manufactured  by Selective Laser Melting.  Materials, 2022, 15, 5298.  https://doi.org/10.3390/ma15155298

83. S.H. Xiao, C Zhang, Qing-Hua  Qin, H Wang, A novel planar  auxetic phononic crystal with  periodic cookie-shaped cellular  microstructures, Mechanics of  Advanced Materials and  Structures 29:23, 3345-3358,  2022.

84. He, Q.; Wang, M.; Du, Y.;  Qing-Hua Qin; Qiu, W.,  Quantitative characterization of  the anisotropy of the  stress-optical properties of  polyethylene terephthalate films  based on the photoelastic  method, Polymers, 14, 3257,  2022.

85. S.H.Yan, Z. Zhong,  Qing-Hua  Qin*, Tailoring small-scale  plasticity of nanotwined-copper  micropillars  via microstructures, Journal of  Applied Physics, 132, 135102,  2022

86. Wu-Gui Jiang, Gao-Gui Xu, Qi  Li, Qing-Hua Qin, Mao-Lin Li,  Yuan-Yuan Sun, Improvement of  wetting and necking of  nickel-based superalloys  fabricated by sequential  duallaser powder bed fusion via  particle-scale computational  fluid dynamics, Additive  Manufacturing, 59, 103203, 2022

87. Kun Cai, Xin Zhou, Jiao Shi,  Qing-Hua Qin, Water transport  behaviors in a CTT-type nanotube  system, Microfluidics and  Nanofluidics, 26 (11), 91, 2022

88. Kun Cai, Puwei Wu, Qing-Hua  Qin, Local nanoflow field  produced by the bladed rotor in  a rotation transmission  nanosystem in water  environments, Materials Science  & Engineering B, 286, 116046,  2022

2023

89. Zihao Wang, Mengyu Li, Bin  Wang, Yin Xu, Jinyu Li, Shengmin  Zhang, Qing-Hua Qin. Jianglin  Wang, Biomimetic niche of  vascular intima with biophysical  orientation and biochemical  stimulation for rapid  endothelialization and long-term  patency, Chemical Engineering  Journal 451, 138805, 2023

90. Bo Song, Kun Cai, Jiao  Shi, Qing-Hua Qin, Self-assembly  for preparing nanotubes from  monolayer graphyne ribbons on a  carbon nanotube, Nanotechnology,  34(4), 045602, 2023

91.  Cheng Xiong, Cheuk-Yu Lee,  Qing-Hua Qin, Topology  optimization of single-phase  phononic crystals based on a  search-space-reduction strategy  with a Genetic Algorithm,  Materials Today Communications,  34, 105069, 2023

92. Qi Li, Wu-Gui Jiang,  Qing-Hua Qin, Zhi-Xin Tu,  Duo-Sheng Li, Particle-scale  computational fluid dynamics  study on surface morphology of  GH4169 superalloy during  multi-laser powder bed fusion  with low energy density, Journal  of Manufacturing Processes, 92,  287-296, 2023

93. Qiu L, Ma X, Qing-Hua Qin, A  novel meshfree method based on  spatio-temporal homogenization  functions for one-dimensional  fourth-order fractional  diffusion-wave  equations, Applied Mathematics  Letters, 142, 108657, 2023

94. Bo Song, Kun Cai, Pan Jia,  Qing-Hua Qin, A nanoscroll  robustly formed by self-folding  a γ-graphyne ribbon on a  CNT, Computational Materials  Science, 225, 112163, 2023

95. S.H. Yan, T.D. Bennett, W.P.  Feng, Z.Y. Zhu, D.C. Yang, Z.  Zhong, Qing-Hua Qin,  Brittle-to-ductile transition  and theoretical strength in a  metal-organic framework  glass, Nanoscale, 15,8235-8244,  2023

96. Yingbin Zhang, Hongjun Yu,  Qing-Hua Qin, Chuanyong Qu,  Jianshan Wang, Theoretical  modelling of the mechanical  properties of biological fibres  bundles with hierarchical chiral  structures, Acta Mechanica  Sinica, 39, 622403, 2023

97. Xianjia Meng, Qing-Hua Qin,  Chuanyong Qu, Kai Kang, Zhiyong  Wang, Wei Qiu, Chuan Qu, Donghui  Fu, The characterization of  bovine compact bone fatigue  damage using Terahertz  spectroscopy, Zeitschrift fuer  Medizinische Physik (Journal of  Medical Physics), 33, 192-202,  2023

98. M.H. Zhang, Y.  Xiao, Qing-Hua Qin, Modal-based  analysis for aiding 3D elastic  metastructure design,  International Journal of Applied  Mechanics, 15(7), 2350058, 2023

发明专利：

1. Chao Hu, Qing-Hua Qin, and  Haiyang Zhou, The design of an intermediate  extrusion die for manufacturing  continuous high performance  fiber reinforced composite  filaments, Patent  number: 2019202860.  Australian Standard Patent, 2020  (granted on  27/02/2020)

2. Chao Hu, Qing-Hua Qin, Winson  NG Joon Hau, Haiyang Zhou, The twin-screw extrusion of long  carbon fibre reinforced  polylactic acid filaments for 3D  printing, Patent number:  2019205991, Australian Standard  Patent, 2020 (granted on  20/08/2020)

3.Xiong Cheng, Li Da Wang, Wei  Ren, Xin Feng, Qing-Hua Qin,  Chen Xi, Lv Pan, Li Qin Yuan.  A  two-way steady circumferential  flow velocity measuring device.  Patent number: ZL201721351487.3,  Chinese Utility Model Patent,  2018

■其他