李树奎教授

北京理工大学教授（二级），博士生导师，深圳北理莫斯科大学材料科学系第一副主任。曾任北京理工大学理学与材料学部委员，材料学院副院长，国防科技重点实验室主任，毁伤与防护材料学科方向责任教授。主持多项国家级重点科研项目，研究成果在40余个型号产品上应用。先后获部级科研成果奖8项，国家技术发明二等奖1项，获评北京市优秀共产党员。

■ Biography-Short  Description

■ 教育经历

■ 工作经历

□ 1990.04-1993.06 北京理工大学 助教

□ 1993.07-1995.06 北京理工大学 讲师

□ 1995.07-2002.06 北京理工大学 副教授

□ 2002.07-当前 北京理工大学 研究员

□ 2001.05-2001.07 乌克兰基辅工学院 高级访问学者

□ 2004.09 北京理工大学 博导

□ 2009.10-2020.03   北京理工大学材料学院 副院长

   (2019.07-2020.08   北京理工大学求是书院 轮值副院长)

□ 2016.12-2021.4  冲击环境材料技术国防科技重点实验室主任

□ 2003.12-2022.12 毁伤与防护材料学科方向责任教授

□ 2003.12-2024.09 先进材料成型理论与技术学科方向责任教授

□ 2008.12-当前  毁伤与防护材料国防科技创新团队学术带头人

□ 2021.01-当前，深圳北理莫斯科大学材料科学系中方主任

■ 研究领域

□ 材料动态力学响应与性能表征；

□ 战斗部用新材料；

□ 冲击防护材料；

□ 新能源材料

■ Research  Interest

■ 主讲课程

1．工程材料基础；

2．材料力学性能与失效分析；

3．热加工工艺；

4．弹性力学

■ 社会兼职

□北京理工大学 理学与材料学部第一届、第二届委员会委员（2009-）

□北京理工大学 学报编辑部编委（2011-）

□北京市难熔金属材料工程技术研究中心技术委员会委员（2011-）

□中国稀土学会第五届玻璃陶瓷专业委员会委员（2010-）

□第三届兵工学会兵器材料动态力学专业委员会委员（2007-）

□爆炸科学与技术国家重点实验室防护理论与技术研究部主任（2010-）

□《兵器材料科学与工程》编委会委员（2016.11-）

□厦门市军民融合促进会成员（2020.11-）

□深圳市大鹏新区葵涌中学科技副校长（2024.09-）

■ 荣誉奖励

□1992年，“大能量高速材料试验机”获部级科技进步二等奖，排名第三；

□1993年，“兵器材料动态破坏与细观结构及热处理关系的研究”获部级科技进步二等奖，排名第二；

□1994年，“一维压杆规范化实验研究”获部级科技进步三等奖，排名第四；

□2000年，“XX结构与材料动态响应技术研究”获国防科学技术二等奖，排名第五；

□2005年，“贝氏体钢在XX上的应用技术”获国防科学技术二等奖，排名第七；

□2007年，“易XXX合金XX材料研究”获国防技术发明一等奖，排名第二；

□2010年，“XX材料的模拟表征与优化设计”获国防科学技术进步二等奖，排名第三；

□2010年，“易碎XX合金XX材料研究”获国家技术发明二等奖，排名第二；

□2016年，“毁伤与防护材料”国防科技创新团队奖，排名第三；

□2017年，“以专业学位研究生工程实践能力培养为核心的课程教学模式探索与实践”，北京市教学成果二等奖，排名第四；

□2021年，XXX用钛铝合金，获国防技术发明二等奖，排名第二.

■ 科研工作

□ 总装备部预研项目“易XXX合金XX材料研究”，1996-2000 ，副组长；

□总装备部预研项目“XX用钨合金研究”，2001-2005 ，项目负责人；

□总装备部预研基金项目“钨丝集束XX研究”， 1997-1998，项目负责人；

□总装备部国防973项目“XX材料的模拟表征与优化设计”，1999-2004，专题负责人；

□总装备部预研项目“XX用纯钨材料研究”，2006-2010 ，项目负责人；

□ 总装备部国防973项目“高性能XXX和XXX研究”，2010-2013，课题负责人；

□总装备部预研项目“XX用纯钨和钨合金材料研究”，2011-2015 ，项目负责人；

□军工863项目“超细晶XXX材料研究”，2001-2005，子项目负责人；

□国防基础科研项目“高强度XXX钨合金研究”，2006-2010 ，分承包单位负责人；

□ 国防科工局一条龙项目“XXX合金在XXX应用研究”，2008-2012,分承包单位副组长;

□ 军用共性技术项目“大破孔XXX应用技术研究”， 2017-2020 ，项目负责人；

□ 086项目“毁伤与防护材料数据库研究”，2017-2018，项目负责人；

□ 国防科工局稳定支持项目“XXXX合金材料研究”，2020-2022 ，项目负责人.

■代表性成果（论文和专利）

主要论文(部分)：

•Zhao-Hui Zhang, LongQi, Xiang-BoShen, Fu-ChiWang, Shu-KuiLee, Microstructure and mechanical properties of bulk carbon nanotubes compacted by spark plasma sintering,Materials Science&EngineeringA 573(2013)12–17.(SCI)

•Guo Wenqi, LiuJinxu, LiShukui, WangYingchun, JiWei, Microstructural evolution and

deformation mechanism of the 80 W-20Cu alloy at ultra-high strain rates under explosive loading, Materials Science & Engineering A 572 (2013) 36–44.(SCI)

•Qiurong Yang, Jinxu Liu, Shukui Li, Fuchi Wang, Tengteng Wu, Fabrication and mechanical properties of Cu-coatedwoven carbon fibers reinforced aluminum alloy composite,Materials and Design 57 (2014) 442–448.(SCI)

•Xiaoliang Fang, JinxuLiu, XingWang, ShukuiLi, LinglingZheng, Study on improving“self-sharpening” capacity ofW–Cu–Zn alloy bythepressurelessinfiltrationmethod, Materials Science & Engineering A 607(2014)454–459.(SCI)

•GuoWenqi, LiuJinxu, LiShukui, ZhangHongyan, ZhaoZiying, ChengXingwang, The effect of preparation methods on the microstructure and dynamic compressive properties of 65W–25Cu –10Ni alloys, Int. Journal of Refractory Metals and Hard Materials 48 (2015) 238–244.(SCI)

•Lingli Gao, JinxuLiu, XingwangCheng, ShukuiLi, YumengLuo, QiwenGuo, Effects of short timeelectric pulse heat treatment on microstructures and mechanical properties of hot-rolled Ti–6Al–4V alloy, Materials Science & Engineering A 618(2014)104–111.(SCI)

•Liu Wang, Ying Chun Wang, Alexander P. Zhilyaev, Alexander V. Korznikov,Shu Kui Li, Elena Korznikov and Terence G. Langdonc,d. Microstructure and texture evolution in ultrafine-grained pure Ti processed by equal-channel angular pressing with subsequent dynamic compression, Scripta Materialia 77 (2014) 33–36.(SCI)

•Liu Wang, Yingchun Wang,Alexander P. Zhilyaev,Alexander V. Korznikov,Shukui Li,Elena Korznikova ,Terence G. Langdon, Dynamic compressive behavior of ultrafine-grained pure Ti at elevated temperatures after processing by ECAP, J Mater Sci (2014) 49:6640–6647.(SCI)

•A. R. NIAZI, Shu-kui LI, Ying-chun WANG, Jin-xu LIU, Zhi-yu HU, Zahid USMAN, Parameters optimization of electroless deposition of Cu on Cr-coated diamond, Trans. Nonferrous Met. Soc. China 24(2014) 136-145.(SCI)

•Hao Yanjun, Liu Jinxu, Li Jianchong, Li Shukui, Zou Qinghe, Chen Xingwang, Rapid preparation of TiC reinforced Ti6Al4V based composites by carburizing method through spark plasma sintering technique, Materials and Design 65 (2015) 94–97.(SCI)

•GuoWenqi, LiuJinxu, LiShukui, ZhangHongyan, ZhaoZiying, ChengXingwang, The effect of preparation methods on the microstructure and dynamic compressive properties of 65W–25Cu –10Ni alloys, Int. Journal of Refractory Metals and Hard Materials 48 (2015) 238–244.(SCI)

•Lingling Zheng, Jinxu Liu, Shukui Li, GuohuiWang,Wenqi Guo, Investigation on preparation and mechanical properties of W–Cu–Zn alloy with low W–W contiguity and high ductility, Materials and Design 86 (2015) 297–304.(SCI)

•Hao Yanjun, Liu Jinxu, Li Jianchong, Li Shukui, Zou Qinghe, Chen Xingwang, Rapid preparationof TiC reinforced Ti6Al4V based composites by carburizing method through spark plasma sintering technique, Materials and Design 65 (2015) 94–97 .(SCI)

•Hong Yan Zhang,Chuan Ting Wang,Ying Chun Wang,Shu Kui Li, Hong Zou,Terence G. Langdon, Microstructural evolution and microhardness variations in a Cu–36Zn–2Pb alloy processed by high-pressure torsion, J Mater Sci (2015) 50:1535–1543 .(SCI)

•Xiaoliang Fang, Jinxu Liu, XingWang, Shukui Li,Wenqi Guo, Investigation on the penetration performance and “self-sharpening”behavior of the 80W–14Cu–6Zn penetrators, Int. Journal of Refractory Metals and Hard Materials 54 (2016) 237–243 .(SCI)

•Zhiyu Hu, Jinxu Liu , Shukui Li, Yingchun Wang, Wenqi Guo, Siming Ma, preparation and anisotropic compressive deformation behaviors of tungsten fiber reinforced Cu-Zn matrix composite, Materials Science & Engineering A 708 (2017) 43–49 .(SCI)

•Hao Yanjun, Liu Jinxu, Li Jianchong, Li Shukui, Wang Guohui, Investigation on dynamic properties and failure mechanisms of Tie47Ale2Cre2Nb alloy under uniaxial dynamic compression at a temperature range of 288 Ke773 K, Journal of Alloys and Compounds 649 (2015) 122-127 .(SCI)

•GuoWenqi, Liu Jinxu, Xiao Yao, Li Shukui, Zhao Ziying, Cao Jin, Comparison of penetration performance and penetration mechanism of w-cu shaped charge liner against three kinds of target: Pure copper, carbon steel and Ti-6Al-4V alloy, Int. Journal of Refractory Metals and Hard Materials 60 (2016) 147–153 .(SCI)

•Ziying Zhao, Jinxu Liu,Wenqi Guo, Shukui Li, GuohuiWang, Effect of Zn and Ni added inW–Cu alloy on penetration performance and penetration mechanism of shaped charge liner, Int. Journal of Refractory Metals and Hard Materials 54 (2016) 90–97 .(SCI)

•Ling-Ling Zheng, Jin-Xu Liu , Shu-Kui Li,Shuang Liu, Qing-He Zou, Xing-Wang Cheng,Preparation and properties of W–Cu–Zn alloy with low W–W contiguity, Rare Met. (2016) 35(3):242–248 .(SCI)

•Jin Cao, Jinxu Liu, Xingwei Liu, Shukui Li, Xinying Xue, Effect of the distribution state of transition phase on the mechanical properties and failure mechanisms of the W-Mo-Cu alloy by tuning elements content, Journal of Alloys and Compounds, 2020，154333、1-9 .(SCI)

•Jia Lan, Jinxu Liu, Song Zhang, Xinying Xue, Chuan He, Zhouyang Wu, Min Yang, Shukui Li, Influence of multi-oxidants on reaction characteristics of PTFE-Al-XmOY reactive material, Materials and Design, 2020,186,108325 .(SCI)

•Xuzhen Liu, Yanjun Hao, Jinxu Liu, Shukui Li, Qi Cai, Yanwei Lv, Comparison of high-temperature deformation behaviors for Ti–Al–Nb–Valloy with different initial microstructures at the strain of 0.7, Materials Science & Engineering A, 2020，795，1-10 .(SCI)

•Min Yang, Jinxu Liu, Shukui Li, Song Zhang, Zhihua Zhuang, Yingchun Wang, Chuan He,Self-sustained solid-state exothermic reaction for scalable graphene production, Materials and Design, 2020，196,1-6 .(SCI)

•Li Huicong，Cai  Qi，Li  Shukui，Xu  Hanqing，Effects of Mo equivalent on the phase constituent, microstructure and compressive mechanical properties of Ti-Nb-Mo-Ta alloys prepared by powder metallurgy，JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T，Vol.16,P588-598.(SCI)

•Fang, Zhuqing,Li, Shukui, Liu, Jiping, Probing the Effects of Deuteration on the Structure and Thermal Behavior of TNT-d(5),PROPELLANTS EXPLOSIVES PYROTECHNICS, VOL46,P1581-1588.(SCI)

•Wang, Yingchun,Liu, Jinxu,Yang, Min,Hou, Lijuan,Xu, Tingting,Li, Shukui,,Zhuang, Zhihua,He, Chuan, Energetic-Materials-Driven Synthesis of Graphene-Encapsulated Tin Oxide Nanoparticles for Sodium-Ion Batteries,MATERIALS,VOL.14.(SCI)

•Liang  Jia-xin,Wang Ying-chun,Cheng Xing-wang,Li  Zhuang Du, Jin-ke,Li  Shu-kui, Microstructure and mechanical properties of a Cr-Ni-W-Mo steel processed by thermo-mechanical controlled processing, JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, VOL.28,P713-721.(SCI)

•Cai Qi,Li Xinyao,Li  Shukui,He  Chuan,Liu Xingwei,Feng Xinya,Dehydrogenation-induced crystal defects for significant enhancement of critical current density in polycrystalline H-doped MgB2, JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS,VOL.32,P843-852.(SCI)

•Li, HC,Cai, Q, Li, SK,Xu, HQ ,Effects of Mo equivalent on the phase constituent, microstructure and compressive mechanical properties of Ti-Nb-Mo-Ta alloys prepared by powder metallurgy, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T,VOL6,P588-598.(SCI)

• Fang, ZQ , Li, SK,Liu, JP ,Probing the Effects of Deuteration on the Structure and Thermal Behavior of TNT-d(5), PROPELLANTS EXPLOSIVES PYROTECHNICS,VOL46,P1581-1588.(SCI)

• Li, Z,Wang, YC,Cheng, XW, Li, ZY ,Gao, C, Li, SK, The effect of rolling and subsequent aging on microstructures and tensile properties of a Fe-Mn-Al-C austenitic steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,VOL822.(SCI)

• Wang, YC,Liu, JX,Yang, M,Hou, LJ, Xu, TT, Li, SK , Zhuang, ZH ,He, C, Energetic-Materials-Driven Synthesis of Graphene-Encapsulated Tin Oxide Nanoparticles for Sodium-Ion Batteries ,MATERIALS,VOL14.(SCI)

• Liang, JX ,Wang, YC ,Cheng, XW ,Li, Z, Du, JK,Li, SK ,Microstructure and mechanical properties of a Cr-Ni-W-Mo steel processed by thermo-mechanical controlled processing ,JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL VOL28,P713-721.(SCI)

• Gao, C ,Wang, YC ,Cheng, XW, Ma, XY,Li, SK, Cai, HN,Tensile properties of tungsten/glass composites at elevated temperatures,MATERIALS CHEMISTRY AND PHYSICS,VOL259.(SCI)

• Cai, Q ,Li, XY , Li, SK,He, C,Liu, XW,Feng, XY ,Dehydrogenation-induced crystal defects for significant enhancement of critical current density in polycrystalline H-doped MgB2,JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS,VOL32,P843-852.(SCI)

• Yang, M,Liu, JX , Li, SK,Zhang, S ,Zhuang, ZH, Wang, YC ,He, C,Self-sustained solid -state exothermic reaction for scalable graphene production,MATERIALS & DESIGN,VOL196.(SCI)

• Liu, XZ,Hao, YJ,Liu, JX , Li, SK, Cai, Q, Lv, YW , Comparison of high-temperature deformation behaviors for Ti-Al-Nb-V alloy with different initial microstructures at the strain of 0.7,MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,VOL795.(SCI)

• Fu, HD,Feng, XY, Liu, JX, Yang, ZM, He, C ,Li, SK,An investigation on anti -impact and penetration performance of basalt fiber composites with different weave and lay-up modes, DEFENCE TECHNOLOGY ,VOL16,P787-801.(SCI)

• Cao, J ,Liu, JX , Liu, XW,Li, SK,Xue, XY,Effect of the distribution state of transition phase on the mechanical properties and failure mechanisms of the W-Mo-Cu alloy by tuning elements content ,JOURNAL OF ALLOYS AND COMPOUNDS,VOL827.(SCI)

• Li, Z ,Wang, YC ,Cheng, XW,Li, ZY , Du, JK, Li, SK ,The effect of Ti-Mo-Nb on the microstructures and tensile properties of a Fe-Mn-Al-C austenitic steel,MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,VOL780.(SCI)

• Li, Z,Wang, YC , Cheng, XW ,Liang, JX , Li, SK,Compressive behavior of a Fe-Mn-Al-C lightweight steel at different strain rates,MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,VOL772.(SCI)

• Lan, J , Liu, JX ,Zhang, S ,Xue, XY,He, C ,Wu, ZY,Yang, M, Li, SK, Influence of multi-oxidants on reaction characteristics of PTFE-Al-XmOY reactive material,MATERIALS & DESIGN,VOL186.(SCI)

发明专利(部分)：

•李树奎，王富耻，王迎春，黄国华. 一种高 XXX 的 WiNi-Fe 系 XXX 材料. 专利号: ZL200510001484.2 授权公告日: 2007.11.28  

•李树奎，王富耻，张朝晖. 一种易碎型 XXX 材料动态拉伸强度测试装置. 专利号: ZL200510001460.7 授权公告日: 2007.8.22  

•王富耻，李树奎，王迎春，程兴旺，黄国华，赵红梅. 高侵彻XX的中小XX的W-Ni-CuXX 材料. 专利号: ZL 200510001485.7 授权公告日: 2007.8.22  

•程兴旺，王富耻，黄国华，李树奎，王迎春. 一种高侵彻XX的纯钨XX材料的制备方法. 专利号: ZL 200710082047.7 授权公告日: 2009.7.1  

•程兴旺，王富耻，李树奎，王迎春. 一种具有 XX 效应的 W-Ni-Al 材料. 专利号: ZL200710082048.1 授权公告日: 2009.7.1  

•王富耻，张朝晖，李树奎. 一种钨丝集束 XXX 及其静液挤压成形方法. 专利号: ZL200510001459.4 授权公告日: 2009.10.21  

•张朝晖，王富耻，李树奎，王鲁. 一种钨铼 XXX 材料及制备 XX 的方法. 专利号: ZL200510001221.1 授权公告日: 2009.12.16

•张朝晖，王富耻，李树奎. 一种稀土元素镧改性的XX钨合金材料的制备方法. 专利号: ZL200510001458.X 授权公告日: 2010.4.14

•刘金旭，李树奎，郝彦君, “一种 XXXTi3AlNb XXX 制备技术”. 专利号: ZL201418007451.9 , 授权公告日: 2017.4.15

•刘金旭，李树奎，郝彦君, “一种 XXXTiAlNb XXX 制备技术”. 专利号: ZL201418007450.4 , 授权公告日: 2017.4.15

•刘金旭，李树奎，曹进, “一种W-Cu合金 XXX制备技术”. 专利号: ZL 201318007353.0 , 授权公告日: 2016.7.14

业余爱好：国画